Introduction3 pole XLR female - Mono 1/4" plug (Tip, Sleeve contact)
Wired according to IEC 268-12: pin 2 = signal pin 1 and 3: connected to ground
Features
- Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
- Professional look and compact space saving design, based on the X Series (XLR worldwide accepted standard)
- Rugged diecast shell for best reliability.
Specifications
Electrical |
|
| Contact resistance |
≤ 3 mΩ (XLR) |
| Dielectric strength |
1.5 kV dc / > 1 kVdc (XLR/Plug) |
| Insulation resistance |
> 2 GΩ |
Mechanical |
|
| Wiring |
according to IEC 268-12 pin 2 = signal, pin 1 and 3 connected to ground |
| Locking device |
Latch lock |
Material |
|
| Contact plating |
2 µm Ag over 2 µm Ni |
| Contacts |
Bronze (CuSn6) (XLR) |
| Contacts |
Brass (CuZn39Pb3) (plug) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
gal Cu/Ni |
Environmental |
|
| Temperature range |
-20 °C to +65 °C |
Ordering InformationNA2FP - Female, Mono tip/sleeve plug to 1/4 inch XLR
NA2MP - Male, Mono tip/sleeve plug to XLR
Downloads Product Drawing - Neutrik
|
|
|
